Land surveying in Australia: GDA2020, MGA2020 and AHD heights
Australia is a moving continent: the datum stands still while the plate travels about 7 centimetres a year.
Field takeaways
- The official datum is GDA2020 (geographic EPSG 7844), based on ITRF2014 at epoch 2020.0.
- MGA2020 zones run from 49 to 56 (EPSG 7849 to 7856).
- GDA94/MGA94 (EPSG 28349 to 28356) uses the same zone numbers; the two datums are about 1.8 metres apart.
- Because of plate motion, today's ITRF/WGS84 position drifts away from GDA2020 by about 7 cm a year.
- Heights are on AHD; GNSS ellipsoid heights convert with AUSGeoid2020.
The official datum: GDA2020
Australia's official datum is GDA2020 (geographic EPSG 7844). According to Geoscience Australia it is based on ITRF2014 at epoch 2020.0, and it is static: coordinates are fixed to 1 January 2020. Its projected counterpart is the UTM-based MGA2020, in which the mainland spans eight zones, 49 to 56 (EPSG 7849 to 7856).
GDA94: same numbers, different datum
The previous datum, GDA94, was based on ITRF92 at epoch 1994.0. With the continent moving about 7 cm a year, the two datums were about 1.8 metres apart by 2020. MGA94 zones (EPSG 28349 to 28356) carry the same numbers, so files look alike and the 1.8-metre shift is often the only clue. Older AGD66 and AGD84 data sits roughly 200 metres away.
Today's GNSS and a static datum
The continent did not stop in 2020: an ITRF or WGS84 position at the current epoch drifts from the GDA2020 value by about 7 cm a year, and the gap is already in the decimetres. Check whether your RTK corrections are broadcast in GDA2020 or at the current epoch.
Heights: AHD
The official vertical datum is AHD: AHD71 on the mainland, AHD-TAS83 in Tasmania. A GDA2020 ellipsoid height converts to AHD with AUSGeoid2020. Datum and geoid model must match; GDA94 and GDA2020 ellipsoid heights also differ by about 9 cm.
The app in Australia
MapLab Survey opens with the official coordinate system of the user's location in 148 countries and offers 564 coordinate systems, searchable by EPSG code. Search your MGA zone by its EPSG code in the coordinate system list and check that it is the one your project uses — GDA2020 or GDA94. RTK GNSS, offline work and DXF, KML or Shapefile export run in the same workflow.
Try these steps on your own phone.
MapLab Survey handles RTK/GNSS point capture, drawing, area and volume calculations and coordinate conversion, then exports to DXF, KML/KMZ, GeoJSON, Shapefile, GeoPackage, NCZ or CSV. Capture, calculation and export work offline. Live NTRIP corrections and online basemaps need a connection.
Frequently asked questions
Which system is official in Australia?
The GDA2020 datum and its projection MGA2020; the mainland spans zones 49 to 56 (EPSG 7849 to 7856). Heights are on AHD.
How far apart are GDA94 and GDA2020?
About 1.8 metres. Because the zone numbers are the same, which datum a file uses has to be read from its label.
Why does my GNSS position differ from the GDA2020 value?
GDA2020 is static; an ITRF/WGS84 position at the current epoch drifts about 7 cm a year with the plate. Check which frame your RTK corrections use.
How do I find my MGA zone in the app?
Search it by its EPSG code in the coordinate system list and check GDA2020 versus GDA94 against your project.
Technical references
The field guidance in this article is aligned with the technical and official references below.
Related: Coordinate conversion app · GNSS Z and elevation · Bluetooth RTK GNSS · MapLab Survey