Land surveying in India: WGS84/UTM and the Everest legacy
Two generations of coordinates sit side by side in India: the WGS84 of GNSS and the old sheets built on the Everest ellipsoid.
Field takeaways
- Most current work runs in UTM on WGS84; the country spans UTM zones 42 to 47.
- Survey of India's Open Series Maps (OSM) are published on WGS84 and UTM.
- Older topographic sheets sit in the Indian datum on the Everest 1830 ellipsoid (origin at Kalianpur).
- Mixing the two shifts points by tens to hundreds of metres depending on location; it is not a constant offset.
- 'Indian 1975' in the EPSG registry is a Thailand datum; the India entries are named Kalianpur.
Current work: WGS84 and UTM
In India most GNSS surveys and current projects run in UTM on WGS84, and Survey of India's Open Series Maps (OSM) are published on WGS84 and UTM. The country spans six UTM zones, 42 to 47, from Gujarat to Arunachal Pradesh.
The Everest legacy
Older topographic sheets and many archived plans sit in the Indian datum on the Everest 1830 ellipsoid, with its origin at Kalianpur. The sheets used a polyconic projection, and the old Indian Grid used Lambert Conformal Conic zones. Everest 1830 exists in more than one defined version; the same name in two software packages may not mean the same constants.
When the two are mixed
The difference between the Indian datum and WGS84 varies with location and can run from tens to hundreds of metres. There is no single nationwide offset; a sheet fitted with one shift holds in one area and fails in the next. The most reliable check is local control with known values in both systems. A naming trap: "Indian 1975" in the EPSG registry is defined for Thailand; the India entries are Kalianpur 1937 and Kalianpur 1975.
Heights
Heights on Survey of India control refer to mean sea level; a GNSS ellipsoid height is not that. Agree up front which geoid model the project uses.
The app in India
MapLab Survey opens with the official coordinate system of the user's location in 148 countries and offers 564 coordinate systems, searchable by EPSG code. Search your zone by its EPSG code in the coordinate system list and check that it is the one your project uses. RTK GNSS, offline work and DXF, KML or Shapefile export run in the same workflow.
Try these steps on your own phone.
MapLab Survey handles RTK/GNSS point capture, drawing, area and volume calculations and coordinate conversion, then exports to DXF, KML/KMZ, GeoJSON, Shapefile, GeoPackage, NCZ or CSV. Capture, calculation and export work offline. Live NTRIP corrections and online basemaps need a connection.
Frequently asked questions
Which coordinate system is used in India?
Most current work runs in UTM on WGS84 (zones 42 to 47); Survey of India's OSM sheets are WGS84/UTM too. Older sheets sit in the Indian datum on the Everest ellipsoid.
Why does an old Survey of India sheet disagree with my GNSS survey?
The sheet is most likely in the Indian datum; the gap to WGS84 runs from tens to hundreds of metres depending on location and cannot be removed with one shift.
Is 'Indian 1975' the right choice in my software?
For India, usually not: Indian 1975 in the EPSG registry is defined for Thailand. The India entries are named Kalianpur 1937 and Kalianpur 1975.
How do I find my zone in the app?
Search it by its EPSG code in the coordinate system list and check that the datum matches your project.
Technical references
The field guidance in this article is aligned with the technical and official references below.
Related: Coordinate conversion app · Placing a scanned sheet · Bluetooth RTK GNSS · MapLab Survey