Land surveying in Japan: JGD2011 and the 19-zone plane grid
In Japan a coordinate also carries whether it was measured before or after the earthquake.
Field takeaways
- The legal datum is JGD2011 (geographic EPSG 6668), introduced after the 2011 Tōhoku earthquake.
- Large-scale work runs in the 19-zone plane rectangular coordinate system (平面直角座標系); EPSG 6669 to 6687 for JGD2011.
- Zones follow prefecture and municipal boundaries, not longitude; most of Tokyo is zone IX (EPSG 6677).
- X points north and Y east; there is no false origin, so values can be negative.
- JGD2000 data in eastern Japan is corrected to JGD2011 with PatchJGD; the old Tokyo Datum converts with TKY2JGD.
The legal datum: JGD2011
Japan's geodetic reference is maintained by the Geospatial Information Authority of Japan (GSI). After the 2011 Tōhoku earthquake, GSI recomputed control and benchmark values in Tokyo and 19 prefectures, and in October 2011 the datum became JGD2011 (geographic EPSG 6668). In western Japan values stayed the same as JGD2000; the change was concentrated in the east.
The 19-zone plane rectangular system
Large-scale surveying and cadastre run in 平面直角座標系: 19 zones, I to XIX, each a Transverse Mercator projection with a scale factor of 0.9999 on its origin meridian. For JGD2011 the EPSG codes run from 6669 to 6687. Zones follow prefecture and municipal boundaries, not longitude; most of Tokyo is zone IX (EPSG 6677). X points north and Y east, and with no false origin, values can be negative.
From JGD2000 to JGD2011
In the affected prefectures, pre-earthquake JGD2000 data cannot be compared directly with a measurement today; near the Pacific coast of Tōhoku the difference reaches metres. GSI publishes PatchJGD for the correction. The Tokyo Datum behind pre-2002 data is hundreds of metres away and converts with TKY2JGD.
Heights
On 1 April 2025 GSI revised heights to "測地成果2024", a system based on satellite positioning with the JPGEO2024 geoid model. Write down which height result the project uses.
The app in Japan
MapLab Survey opens with the official coordinate system of the user's location in 148 countries and offers 564 coordinate systems, searchable by EPSG code. Search your plane rectangular zone by its EPSG code in the coordinate system list and check that it is the one your project uses — JGD2011 or JGD2000. RTK GNSS, offline work and DXF, KML or Shapefile export run in the same workflow.
Try these steps on your own phone.
MapLab Survey handles RTK/GNSS point capture, drawing, area and volume calculations and coordinate conversion, then exports to DXF, KML/KMZ, GeoJSON, Shapefile, GeoPackage, NCZ or CSV. Capture, calculation and export work offline. Live NTRIP corrections and online basemaps need a connection.
Frequently asked questions
Which coordinate system is official in Japan?
The 19-zone plane rectangular coordinate system (平面直角座標系) on the JGD2011 datum; the JGD2011 zones are EPSG 6669 to 6687.
Can I tell my zone from longitude?
No. Zones follow prefecture and municipal boundaries; most of Tokyo, for example, is zone IX. Check GSI's zone table.
Why does my old JGD2000 plan disagree with a new measurement?
In the affected prefectures of eastern Japan the 2011 earthquake changed coordinates; JGD2000 data should be corrected to JGD2011 with PatchJGD.
How do I find my zone in the app?
Search it by its EPSG code in the coordinate system list and check JGD2011 versus JGD2000 against your project.
Technical references
The field guidance in this article is aligned with the technical and official references below.
Related: Coordinate conversion app · Placing a scanned sheet · Bluetooth RTK GNSS · MapLab Survey