Coordinates

Land surveying in Mexico: ITRF2008, UTM zones and NAD27 data

In Mexico a coordinate's epoch matters as much as its datum: official values belong to the instant 2010.0.

Field takeaways

  • The official geodetic frame, set by INEGI, is ITRF2008 at epoch 2010.0 on the GRS80 ellipsoid.
  • INEGI's active network, RGNA, publishes coordinates at the official epoch 2010.0.
  • The country spans UTM zones 11 to 16: Baja California in 11 to the west, Quintana Roo in 16 to the east.
  • Older maps sit in NAD27; the gap to the official frame is many metres and varies by region.
  • The app opens with the official system of the location in 148 countries; search and verify your zone by EPSG code.

The official frame: ITRF2008, epoch 2010.0

In Mexico the geodetic reference is set by INEGI. The official frame is the realization of ITRF2008 at epoch 2010.0, on the GRS80 ellipsoid. INEGI's continuous GNSS network, the RGNA, publishes station coordinates at that epoch; a survey tied to the network should deliver its results in the same frame.

Why the epoch matters

Most of Mexico sits on the North American plate, while the Baja California peninsula moves with the Pacific plate. Motion measured in centimetres per year has, in places, added up to decimetres since 2010. At metre-level mapping it goes unnoticed; on control and cadastral work, observations are reduced to the official epoch.

UTM 11 to 16

Large-scale production runs in UTM. The country spans six zones: western Baja California falls in 11, the eastern tip of the Yucatán peninsula in 16.

NAD27 and ITRF92: two layers of archive

A substantial share of older topographic maps sits in NAD27; the gap to the official frame is many metres, varies by region and is visible at any scale. Work from before 2010 is often in ITRF92 at epoch 1988.0; its difference is far smaller than NAD27's, but not small enough to ignore on control work.

The app in Mexico

MapLab Survey opens with the official coordinate system of the user's location in 148 countries and offers 564 coordinate systems, searchable by EPSG code. Search your UTM zone by its EPSG code in the coordinate system list and check that it is the one your project uses. RTK GNSS, offline work and DXF, KML or Shapefile export run in the same workflow.

Three facts on every delivery

The file should carry zone, frame and epoch: "UTM 14N, ITRF2008, epoch 2010.0". Without the epoch, even a point measured to the centimetre leaves its value open to argument.

In the field · MapLab Survey

Try these steps on your own phone.

MapLab Survey handles RTK/GNSS point capture, drawing, area and volume calculations and coordinate conversion, then exports to DXF, KML/KMZ, GeoJSON, Shapefile, GeoPackage, NCZ or CSV. Capture, calculation and export work offline. Live NTRIP corrections and online basemaps need a connection.

Frequently asked questions

Which coordinate frame is official in Mexico?

ITRF2008 at epoch 2010.0 on the GRS80 ellipsoid, as set by INEGI. Large-scale work runs in UTM zones 11 to 16.

Why is an old Mexican map metres off?

It is most likely in NAD27; the gap to the official frame is many metres and needs a transformation.

What does epoch 2010.0 mean in the field?

Official coordinates belong to the instant 2010.0. Plate motion means today's position differs by decimetres in places; on control work observations are reduced to that epoch.

How do I find my UTM zone in the app?

Search the zone by its EPSG code in the coordinate system list and check that its frame matches your project.

Technical references

The field guidance in this article is aligned with the technical and official references below.

Share this article WhatsApp Telegram LinkedIn

Related: Coordinate conversion app · What is UTM? · Bluetooth RTK GNSS · MapLab Survey